|
|
Post by adnan on May 7, 2020 23:00:20 GMT
Hello DMTF/Redfish Team,
I am a newbie to Redfish and I apologize if I am asking stupid questions. I am looking into setting up a Redfish In-band host interface to communicate with redfish server. Are there any links to install a In-band Host interface ? Your help is much appreciated.
Thank you
|
|
|
|
Post by jautor on May 8, 2020 5:55:14 GMT
You should look at your vendor's documentation, as the setup of the interface should be explained for the particular product. For most servers, this would likely be in the Systems Management sections or any documentation specific to the BMC. But once that interface is set up, using it will be the same on any supported system...
If you have a specific product/vendor - someone here will likely be able to point you to specific instructions.
Jeff
|
|
|
|
Post by adnan on May 8, 2020 15:58:03 GMT
Hello Jeff,
Thank you. We would be testing with the SuperMicro / X10DRL-I and the Super Micro / X11DAi-N server boards. What can we use to access the redfish server on these boards?
|
|
